OSHA's Top 10 Violations for FY2026: What They Mean for Your Site
By Infranoto
Every fall, OSHA publishes the ten standards it cited most often in the past fiscal year. Every year, the list looks a lot like the one before. FY2026 was no exception: the same ten standards made the list as in FY2025, only in a slightly different order.
That repetition is the useful part. These aren't obscure rules. They're the basics, and they keep getting cited because the same gaps keep showing up on real sites. If you want to know what an inspector is likely to find at your facility, this list is a good place to start.
The FY2026 list
OSHA published the preliminary list for fiscal year 2026, covering federal OSHA inspections from October 1, 2025, to August 31, 2026. It was announced at the NSC Safety Congress & Expo in September, and Safety+Health magazine reported the violation counts:
| Rank | Standard | Citations | Change from FY2025 |
|---|---|---|---|
| 1 | Fall protection, general requirements (1926.501) | 4,041 | No change |
| 2 | Hazard communication (1910.1200) | 1,961 | No change |
| 3 | Lockout/tagout (1910.147) | 1,863 | Up 1 |
| 4 | Scaffolding (1926.451) | 1,725 | Up 2 |
| 5 | Ladders (1926.1053) | 1,659 | Down 2 |
| 6 | Respiratory protection (1910.134) | 1,608 | Down 1 |
| 7 | Powered industrial trucks (1910.178) | 1,379 | Up 1 |
| 8 | Fall protection training (1926.503) | 1,273 | Down 1 |
| 9 | Eye and face protection (1926.102) | 1,120 | No change |
| 10 | Machine guarding (1910.212) | 1,072 | No change |
The figures are preliminary. OSHA usually revises the counts once the full fiscal year's data is in, so expect the numbers (though rarely the order) to shift a little.
Fall protection has now held the top spot for 16 years in a row. The bigger story for general industry is lockout/tagout moving up to third, behind only fall protection and hazard communication.
"Half of these are construction standards. Why should I care?"
Five of the ten (the 1926 standards) are construction rules. If you run a plant or a warehouse, it's tempting to skip them. That's a mistake for two reasons:
- Construction work happens at your site. Roof repairs, mezzanine installs, racking changes, and equipment upgrades often count as construction work, whether your own maintenance crew does them or a contractor does. A contractor's violation on your property can still become your problem.
- Utilities live in both worlds. Line work falls under 1910.269, but excavation, new installs, and many structure jobs pull crews into the construction standards too.
The general industry rules have their own versions of most of these hazards. If ladders and fall protection are getting cited this often on construction sites, the same problems are likely on your mezzanines, dock edges, and maintenance platforms.
What each citation usually looks like on the floor
1. Fall protection (1926.501)
In construction, fall protection is generally required at six feet (general industry uses four feet). The typical citation isn't a missing harness program. It's a specific moment: an unprotected roof edge during a repair, a hole with a loose cover, or a worker tied off to something that was never rated as an anchor.
Where it shows up: rooftop HVAC work at plants, mezzanine edges in distribution centers, and elevated structure work for utility crews.
Check first: list every job where someone works at height and isn't on a permanent platform with guardrails. Those jobs need a plan before the next one starts.
2. Hazard communication (1910.1200)
Hazard communication is mostly a paperwork standard, which is why it's so easy to cite. The common findings are a written program that doesn't match the chemicals actually on site, missing or unreadable secondary container labels, safety data sheets that workers can't get to during their shift, and training that never happened or isn't documented.
OSHA updated the standard in 2024, and its compliance dates are phasing in, so this is a good year to make sure your program reflects the current version.
Check first: walk one area with your chemical inventory in hand. Every container you find should be on the list, labeled, and backed by an SDS someone on that shift can pull up.
3. Lockout/tagout (1910.147)
Most sites have a LOTO program. The citations come from the gaps around it:
- No machine-specific procedures, only a generic one.
- No periodic inspection of each procedure at least once a year, which the standard requires.
- Lockout skipped for "quick" tasks like clearing jams, where the minor servicing exception doesn't actually apply.
- Training that covers authorized employees but not the affected employees who work around the equipment.
LOTO is also one of the two focus areas in OSHA's renewed Amputation NEP, so manufacturers should expect inspectors to ask about it.
Check first: pick the machine that jams most often and ask the operators how they clear it. If the answer doesn't involve locks, you've found your priority. The lockout/tagout toolbox talk is a good way to start that conversation.
4. Scaffolding (1926.451)
Scaffolding moved up two spots this year. Common citations involve scaffolds without proper access, platforms that aren't fully planked, missing guardrails, and scaffolds that were never inspected by a competent person before the shift.
Where it shows up: plant shutdowns and turnarounds, boiler and tank work, and building maintenance. Contractor-erected scaffolds deserve a look even when the contractor is responsible for them.
5. Ladders (1926.1053)
Ladders dropped two spots but are still in the top five. The citations are familiar: damaged ladders left in service, portable ladders that don't extend three feet above the landing, workers standing on the top step, and the wrong ladder for the job, like a metal ladder near energized lines.
Check first: do a ladder sweep. Tag out anything bent, cracked, or missing feet, and make sure your utility crews carry nonconductive ladders. The ladder safety toolbox talk covers the inspection basics.
6. Respiratory protection (1910.134)
If respirators are required at your site, the standard requires a full program: a written plan, medical evaluations before use, fit testing before first use and every year after, and training. Citations usually come from one missing piece, most often fit testing that lapsed or a medical evaluation that never happened.
Voluntary use has rules too. If you let workers wear respirators when they aren't required, such as N95s for comfort, you still have to give them the information in Appendix D of the standard.
Where it shows up: welding, painting and coating, grinding, and any work around dust, from foundries to food processing.
7. Powered industrial trucks (1910.178)
Forklifts moved up one spot, and they're a core focus of OSHA's renewed Warehousing and Distribution NEP. Typical findings:
- Operators driving without a completed training and evaluation.
- Performance evaluations that are more than three years old.
- No refresher training after an incident, a near-miss, or an unsafe operation observation, even though the standard requires one.
- Trucks not examined before being placed in service, as the standard requires.
Check first: pull your operator list and compare it with your evaluation dates. Then look at pedestrian traffic, because many of the worst forklift incidents involve someone on foot. The forklift and pedestrian safety toolbox talk is a five-minute way to reinforce it.
8. Fall protection training (1926.503)
This standard goes hand in hand with #1. Workers exposed to fall hazards need training from a competent person, and the employer needs a written certification of it. The usual citation is training that happened but was never documented, or a crew member who joined after the training was done.
9. Eye and face protection (1926.102)
These citations are usually simple: someone grinding, cutting, or chipping without eye protection, or wearing safety glasses where a face shield was needed. It's an easy fix, which is why it's frustrating to see on the list every year. The PPE basics toolbox talk is a quick refresher for crews.
10. Machine guarding (1910.212)
Machine guarding is the other half of the Amputation NEP. The classic finding is a point-of-operation guard that was removed for maintenance or production speed and never put back. Other common findings are exposed rotating parts, and fixed machines that are supposed to be anchored but aren't.
Check first: walk your line during production, not during a planned audit. Look for guards that are missing, propped open, or modified with zip ties. The machine guarding toolbox talk helps crews spot the same things.
The pattern behind the list
Look at the list again and a theme stands out. Very few of these citations come from a site with no program at all. Most come from the gap between the written program and what happens on a busy Tuesday: the jam cleared without a lock, the training nobody recorded, the guard that came off last month.
That gap is hard to see from a binder. It shows up in other places first: near-miss reports, minor injuries, and observations that a supervisor noted and nobody followed up on. A job hazard analysis built with the crew can bring it out into the open. So can a near-miss reporting program that workers actually use.
A 30-day self-check
You don't need to tackle all ten at once. Pick the ones that match your operation:
| If you run... | Start with |
|---|---|
| A manufacturing plant | Lockout/tagout, machine guarding, hazard communication |
| A warehouse or distribution center | Powered industrial trucks, ladders, fall protection at docks and mezzanines |
| Utility crews | Fall protection and training records, ladders, eye and face protection |
| Any site using contractors | Scaffolding and fall protection on contractor jobs |
For each one, ask three questions: Is the written program current? Is the training documented for everyone who needs it? And when you watch the work, does it match the program?
How Infranoto helps
The top 10 list is a lagging indicator: it tells you what went wrong at other sites last year. Infranoto is built to show you what's starting to go wrong at yours. Incidents, near-misses, observations, and corrective actions live in one place, and AI surfaces the patterns that tend to precede a citation, like repeat guarding observations on the same line or forklift near-misses at the same dock door.
If something does happen, the free OSHA Reporting Checker tells you whether it has to be reported and how fast, and the Incident Rate Calculator shows how your TRIR and DART compare with your industry.
Want to see what's in your own data? Request a demo and we'll show you.
The takeaway
- The list barely changes. The same ten standards made it again in FY2026, so last year's gaps are probably still out there.
- Lockout/tagout is now third. With the Amputation NEP in effect, manufacturers should treat it as a priority.
- Don't skip the construction standards. Contractor work, maintenance, and utility crews bring them onto your site.
- Look for the gap between program and practice. That's where most of these citations come from.