Infranoto
All toolbox talks
General

Ladder Safety

5 minutes

Ladders are so familiar that most people stop thinking about them. A quick job, one more reach, a ladder that's almost tall enough: that's how a two-minute task turns into a serious fall.

You don't need to be very high for a fall to change your life. Most ladder injuries come from something that could have been caught before anyone started climbing.

Key points

  • Inspect the ladder before each use. If rungs, rails, feet, or locks are damaged, tag it and take it out of service.
  • Pick a ladder that's tall enough and rated for your weight plus your tools and materials.
  • Look for overhead power lines before moving a ladder, and use a nonconductive ladder such as fiberglass around energized equipment. Metal conducts electricity.
  • Set extension ladders at a 4-to-1 angle: one foot out for every four feet up. To reach an upper level, extend them at least 3 feet above the landing, and secure them against movement.
  • Maintain three points of contact, face the ladder, and don't carry anything that could throw off your balance.
  • Keep your body centered on the ladder. If you have to lean, climb down and move the ladder.
  • Don't stand on the top step of a stepladder or the top three rungs of an extension ladder unless the ladder was designed for it.

Discussion questions

  • Do we have the right ladders close to where the work happens, or do people make do with what's nearby?
  • What jobs here tempt someone to overreach or stand too high on a ladder?
  • Could any of this week's ladder work be done from a lift or platform instead?